What a sound cleaner does
A sound cleaner is a tone that makes a speaker clean itself. The speaker cone moves back and forth to make sound. When it plays a strong, low or sweeping tone, that movement shakes the air in front of it and the mesh over it. Water droplets and loose dust get pushed toward the outside.
On this site the tones are generated live in your browser. Nothing is downloaded and the microphone is never used.
Sound as a cleaning method
Using vibration to loosen dirt is an old idea. Ultrasonic cleaners for jewellery or glasses work on the same basic principle: vibration shakes dirt off a surface. They are not the same thing as this tool, though. They use sound far above human hearing, usually in a liquid bath, and clean the object placed in it.
The tones here are audible, play in the air and act on your speaker grille only. Holding jewellery, glasses or other objects near your phone will not clean them.
What it can remove and what it cannot
Sound moves things that are loose. It does not dissolve or scrape anything.
- It can help with water droplets sitting in the mesh.
- It can help with loose dust and lint.
- It cannot remove grime glued down by skin oil.
- It cannot remove earwax, which sticks and needs a soft dry brush.
- It cannot remove dried sugary residue from a spilled drink.
- It cannot fix corrosion, a torn cone or a blown speaker. Those need a repair shop or the manufacturer.
Not noise-removal software
A different kind of tool also goes by a similar name. Noise-removal software removes background noise, hiss or hum from recordings and calls. This is not that.
This sound cleaner works on the physical speaker grille. It does nothing to a recording, cannot clean up a noisy video and does not improve call quality. It also does not listen to anything, because it never uses the microphone.
Using it as a dust sound cleaner
- Wipe the phone with a dry cloth and remove the case.
- Turn the volume to maximum, switch off silent mode and disconnect Bluetooth.
- Hold the phone with the speaker grille facing down, so loosened dust can fall out.
- Press Start in Dust mode. The sweep glides up and down between 200 and 1200 Hz for 60 seconds.
- Brush the grille lightly with a soft dry toothbrush, then play a song or voice note.
- Run it once more if the sound is still dull. Stop after a few runs and look for another cause.